I’ve always loved building fresh bikes part by part and I recently got a brand new setup thanks to Fly Bikes. They hooked me up with just about everything I needed to build a top of the line bike and I just got everything together and am ready to ride it. Check out all the parts and specs along with the photos below, and if you are interested in checking out more of their stuff head on over to flybikesbmx.com.
I want to give a huge “thank you” to Fly for all the parts along with Cinema Wheel Co., and Federal Bikes/Tip Plus for hook up as well. Also, a big shout out to Fox for all their support over the years, and of course, my local bike shop here in Long Beach, California, Neighborhood BMX.
Frame: 2011 Fly Pantera, 21″ (Sergio Layos Signature)
Fork: Fly Agua
Bars: 2011 Fly Pantera (Sergio Layos Signature)
Stem: Fly Media
Grips: ODI Longneck
Barends: ODI Plastic
Seat / Post: Fly Uno
Cranks: Fly, 175mm
Bottom Bracket: Fly, Spanish
Sprocket: Federal Street, 25t
Chain: Greenhouse with one Shadow Half-Link link
Brakes: Fly with Fly Hanger
Brake Lever: Fly
Front Tire: Maxxis Grifter Foldable, 2.10″
Front Wheel: Cinema Tungsten, femal axle
Rear Tire: Maxxis Grifter Foldable, 1.85″
Rear Wheel: Cinema Tungsten, 9t
Pedals: Fly Ruben
Pegs: Federal Chromoly
Modifications/Other/Extras: Cut the bars about 3/4″ on each side, put a half-link in the chain, and I use a spoke nipple as a cable end to keep it from fraying.
See detailed photos of these parts, on the Fly Bikes Product Spotlight on ridebmx.com.